MikroTik cAP 2nD RBcAP2nD Ceiling Access Point
The MikroTik cAP 2nD (RBcAP2nD) is a discreet ceiling-mounted wireless access point that delivers dual-chain 2.4 GHz 802.11b/g/n coverage at up to 300 Mbit/s from a slim, unobtrusive round enclosure.
It runs RouterOS on a 650 MHz QCA9533 CPU with 64 MB RAM, draws only 4 W over standard 802.3af/at PoE, and integrates with MikroTik CAPsMAN so large numbers of units can be provisioned and managed centrally - ideal for hotels, offices, schools, clinics, airports and shopping malls.
Available from Acacia Satlink Ltd in Nairobi, Kenya, supplied with wall/ceiling mounting hardware and backed by in-house RouterOS configuration, CAPsMAN setup and on-site commissioning support countrywide.
Key features
- Dual-chain 2.4 GHz 802.11b/g/n (Wi-Fi 4), up to 300 Mbit/s
- Integrated 2 dBi antennas for even ceiling coverage
- Powered over 802.3af/at PoE - single cable install
- Full RouterOS L4 with CAPsMAN central AP management
- Slim 185 mm round case blends into ceilings and walls
- Very low 4 W maximum power consumption
- CPU: Qualcomm Atheros QCA9533, 1 core, 650 MHz
- Architecture: MIPSBE
- RAM: 64 MB
- Storage: 16 MB FLASH
- Operating system: RouterOS, licence level 4
- Wireless standards: 802.11b/g/n (Wi-Fi 4), 2.4 GHz
- Wireless chains: 2 (dual-chain MIMO)
- Max wireless data rate: 300 Mbit/s
- Antenna gain: 2 dBi (integrated)
- Wireless chipset: QCA9533
- Ethernet ports: 1 x 10/100 Mbps
- PoE-in: 802.3af/at, 11-57 V
- DC inputs: 1 (PoE-in)
- Max power consumption: 4 W
- Cooling: Passive (fanless)
- Dimensions: 185 mm diameter x 31 mm height
- Operating temperature: -40 C to +70 C
- Ingress protection: IP20
Specifications are provided for guidance and may be updated by the manufacturer without notice. Contact Acacia Satlink to confirm the current configuration for your deployment.
